 |
| Quantity: | |
|---|---|
Raised neck flange is divided into Raised Face Weld Neck Flange and Raised Face Long Weld Neck Flange
SIZE of raised neck flange: 1/2" to 24" ASME B16.5,24"TO80"B16.47
TYPE OF raised neck flange:WNFSO WF BLOF ETC
FACE OF raised neck flange:RF FF MFM RJ ETC
MOQ OF raised neck flange:1PIECE
Pressure of raised neck flange:DIN/EN/UNI:PN6-PN40
Raised neck flange (WNRF) is commonly used in high pressure scenarios. Raised neck flange In the inquiry, it is necessary to take care to state the pipe used. This is because the inner diameter of the Raised neck flange will match the inner diameter of the pipe or fitting. Raised neck flange is well suited for extreme temperature fluctuations and environments where there may be a lot of bending and handling.
The Premium Raised neck flange (WNRF) is a flange that is connected to the piping system by butt welding. These flanges come in many sizes.
High quality Raised neck flange (WNRF) is expensive due to its long neck and the personnel cost of contacting the pipe or fitting, but is preferred in high pressure environment applications. The neck or hub transfers the stress to the pipe.
The gradual transition from the thickness of the hub base to the wall thickness of the butt weld provides important support for the high quality Raised neck flange. The inner diameter of the Raised neck flange (WNRF) matches the inner diameter of the pipe, reducing turbulence and erosion.
The Raised neck flange and flange sealing surface are spherical or cylindrical, and its sealing performance is obviously better than that of the plane flange. Raised neck flange due to convex, relatively small area, pressure concentration, so strong pressure resistance.
Raised neck flange can be used under high temperature, high pressure, strong corrosion and other working conditions, and has a wide range of applications.
Raised neck flange because of the bulge, can be more simple installation and removal, easy to repair and replace.
Raised neck flange is divided into Raised Face Weld Neck Flange and Raised Face Long Weld Neck Flange
SIZE of raised neck flange: 1/2" to 24" ASME B16.5,24"TO80"B16.47
TYPE OF raised neck flange:WNFSO WF BLOF ETC
FACE OF raised neck flange:RF FF MFM RJ ETC
MOQ OF raised neck flange:1PIECE
Pressure of raised neck flange:DIN/EN/UNI:PN6-PN40
Raised neck flange (WNRF) is commonly used in high pressure scenarios. Raised neck flange In the inquiry, it is necessary to take care to state the pipe used. This is because the inner diameter of the Raised neck flange will match the inner diameter of the pipe or fitting. Raised neck flange is well suited for extreme temperature fluctuations and environments where there may be a lot of bending and handling.
The Premium Raised neck flange (WNRF) is a flange that is connected to the piping system by butt welding. These flanges come in many sizes.
High quality Raised neck flange (WNRF) is expensive due to its long neck and the personnel cost of contacting the pipe or fitting, but is preferred in high pressure environment applications. The neck or hub transfers the stress to the pipe.
The gradual transition from the thickness of the hub base to the wall thickness of the butt weld provides important support for the high quality Raised neck flange. The inner diameter of the Raised neck flange (WNRF) matches the inner diameter of the pipe, reducing turbulence and erosion.
The Raised neck flange and flange sealing surface are spherical or cylindrical, and its sealing performance is obviously better than that of the plane flange. Raised neck flange due to convex, relatively small area, pressure concentration, so strong pressure resistance.
Raised neck flange can be used under high temperature, high pressure, strong corrosion and other working conditions, and has a wide range of applications.
Raised neck flange because of the bulge, can be more simple installation and removal, easy to repair and replace.